SAPのC-TBIT44-71認定試験に楽に受かるコツが何だろう

恐いSAPのC-TBIT44-71試験をどうやって合格することを心配していますか。心配することはないよ、JPexamのSAPのC-TBIT44-71試験トレーニング資料がありますから。この資料を手に入れたら、全てのIT認証試験がたやすくなります。JPexamのSAPのC-TBIT44-71試験トレーニング資料はSAPのC-TBIT44-71認定試験のリーダーです。

SAPのC-TBIT44-71認定試験がIT業界には極めて重要な地位があるがよく分かりましょう。試験に合格するのは簡単ではないもよくわかりましょう。“簡単に合格できる方法がありますか？”答えはもちろんですよ。JPexamはこの問題を着々解決できますよ。IT専門家がSAPのC-TBIT44-71認定試験に関する特別な問題集を開発しています。それをもって、試験は問題になりませんよ。

試験番号：C-TBIT44-71問題集
試験科目：SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1)
最近更新時間：2014-01-03
問題と解答：全80問
100％の返金保証。1年間の無料アップデート。

JPexamのIT専門家たちは彼らの豊富な知識と経験を活かして最新の短期で成果を取るトレーニング方法を研究しました。このトレーニング方法は受験生の皆さんに短い時間で予期の成果を取らせます。特に仕事しながら勉強している受験生たちにとって不可欠なツールです。JPexamトレーニング資料を選んだら、あなたは自分の夢を実現できます。

JPexamはあなたに素晴らしい資料を提供するだけでなく、良いサービスも提供してあげます。JPexamの試験C-TBIT44-71問題集を購入したら、JPexamは無料で一年間のアップデートを提供します。すると、あなたがいつでも最新のC-TBIT44-71試験情報を持つことができます。それに、万一の場合、問題集を利用してからやはり試験に失敗すれば、JPexamは全額返金のことを約束します。こうすれば、まだ何を心配しているのですか。心配する必要がないでしょう。JPexamは自分の資料に十分な自信を持っていますから、あなたもJPexamを信じたほうがいいです。あなたのC-TBIT44-71試験の成功のために、JPexamをミスしないでください。JPexamをミスすれば、あなたが成功するチャンスを見逃したということになります。

今の競争の激しいIT業界ではSAPのC-TBIT44-71試験にパスした方はメリットがおおくなります。給料もほかの人と比べて高くて仕事の内容も豊富です。でも、この試験はそれほど簡単ではありません。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/C-TBIT44-71_exam.html

NO.1 You can create multiple configurations for one Integration Process without changing the
appropriate
process definition.
Which of these parameters allows you to achieve this behavior?
A. Process Signature
B. Container Definition
C. Correlation
D. Configurable Parameters in Conditions
Answer: D

SAP認定試験   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71認定試験

NO.2 To react to situations where it is not possible or not advisable to continue a process in
the normal way,
you can define exceptions.
Which statements correctly describe the triggering of exceptions?
A. A synchronous or asynchronous Send step can trigger an exception when a system error
occurs.
B. Every step type can trigger an exception when a permanent error occurs.
C. A Control step can trigger an exception.
D. A Transformation step can trigger an exception.
E. Exceptions can only be triggered by Control steps.
Answer: A,C,D

SAP過去問   C-TBIT44-71練習問題   C-TBIT44-71

NO.3 If a system error occurs in a send step, an alert can be triggered for Alert Management
and the
integration process should then be terminated.
Where do you define the Alert Category for the appropriate Control Step?
A. Within the SLD
B. Within the transaction ALRTCATDEF on the Integration Server
C. Within the Enterprise Services Builder
D. Within the Process Editor
Answer: B

SAP参考書   C-TBIT44-71過去問   C-TBIT44-71認証試験   C-TBIT44-71

NO.4 For the delivery mode of an integration process, you can choose between inbound
processing with or
without buffering.
Which of these statements correctly describes the Inbound processing mode?
A. SAP recommends the mode for inbound processing with buffering.
B. SAP recommends the mode for inbound processing without buffering.
C. If you select inbound processing without buffering, the qRFC entry returns an error when a
message is
to be delivered to a process instance for which no receive step is active.
D. If you select inbound processing with buffering and there is no active receive step
available to receive
an incoming message, the message is buffered in a separate, process-instance-specific
queue.
Answer: B,C,D

SAP参考書   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71認定資格   C-TBIT44-71参考書

NO.5 A special aspect in B2B business processes is that the business partners involved in
these processes
do not usually provide information about their internal system landscape.
Which configuration objects are relevant for B2B configuration?
A. Receiver Determination
B. Communication Party
C. Software Component Version (SWCV)
D. Communication Channel
Answer: A,B,D

SAP   C-TBIT44-71過去問   C-TBIT44-71練習問題   C-TBIT44-71認定資格

NO.6 You have implemented a scenario where IDocs are posted to an ERP system using the
receiver IDoc
adapter.
Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?
A. IDoc packages are not supported, unless all IDocs are collected by BPM.
B. Specific fields in the IDoc control record can be overwritten using the 'header mapping'
functionality in
the Receiver Agreement.
C. Quality of service EOIO (exactly once in order) is supported, provided that the target
system is a SAP
Web AS 6.40 or above.
D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best
effort) and EO
(exactly once) can be used.
E. A receiver communication channel must be defined in the Integration Builder.
Answer: B,C,E

SAP問題集   C-TBIT44-71認定証   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71認定試験   C-TBIT44-71

NO.7 You configure the sender RFC adapter to convert RFC calls from a sender to XML
messages. These
XML messages are then sent to the Integration Server or to the PCK.
What is the purpose of the RFC adapter parameter "Program ID"?
A. The Program ID is a unique identifier for outbound proxies.
B. The Program ID must uniquely describe the RFC sender communication channel in the
configured
application server gateway.
C. The Program ID identifies proxy classes for Service Interfaces.
D. The Program ID is used in correlation for binding abstract interfaces.
Answer: B

SAP   C-TBIT44-71認証試験   C-TBIT44-71過去問   C-TBIT44-71   C-TBIT44-71認証試験

NO.8 The PI Mail adapter is used to send and receive emails. Which protocols are
supported?
A. SMTP
B. HTTP
C. IMAP4
D. POP3
Answer: A,C,D

SAP認証試験   C-TBIT44-71練習問題   C-TBIT44-71   C-TBIT44-71

NO.9 Which Process Integration objects can be used in an integration process?
A. All objects displayed in the navigation area of the Integration Builder.
B. All objects within the software component version of the integration process.
C. Only the objects within the namespace of the integration process.
D. All objects displayed in the Process Integration Scenario using this process.
Answer: B

SAP認証試験   C-TBIT44-71   C-TBIT44-71認定資格   C-TBIT44-71過去問   C-TBIT44-71認定資格

NO.10 You have created a deadline branch. When the deadline has expired, the integration
process should be
canceled.
How can this be achieved?
A. In the deadline branch, insert a control step that cancels the process.
B. The process is automatically stopped once the deadline has expired.
C. As the process can only be stopped by the administrator, a control step that raises an alert
to inform
the administrator has to be inserted.
D. Insert a switch with an appropriate condition to stop the process.
Answer: A

SAP   C-TBIT44-71問題集   C-TBIT44-71   C-TBIT44-71練習問題

NO.11 Which statements are correct when using the Receiver File adapter to process XML
messages?
A. The messages are processed based on a poll cycle.
B. The adapter can convert the XML payload into a flat file.
C. The adapter can FTP the file to a remote directory.
D. The quality of service can be 'best effort' (BE) only.
Answer: B,C

SAP   C-TBIT44-71参考書   C-TBIT44-71

NO.12 Which of these operations can be performed by a Container Operation step?
A. Incrementing a counter variable.
B. Appending a message to a multiline container element.
C. Removing a message from a multiline container element.
D. Setting the value of an XML element of a message.
Answer: A,B

SAP参考書   C-TBIT44-71   C-TBIT44-71認定資格   C-TBIT44-71参考書   C-TBIT44-71

NO.13 The communication between the Integration Server and the backend applications can
be achieved
without adapters.
Which message protocol should you use for this communication type?
A. RFC-XML
B. PI-SOAP Protocol
C. File
D. JDBC 2.0
Answer: B

SAP認証試験   C-TBIT44-71認定資格   C-TBIT44-71過去問

NO.14 You are implementing an IDoc-based scenario using SAP Netweaver PI and more
specifically the
sender IDoc adapter.
Which of these steps are mandatory for the sender IDoc adapter to function properly?
A. IDoc metadata must be imported into the Enterprise Services Repository.
B. The Logical System name (ALE name) for the Business System must be defined in the
SLD.
C. A sender communication channel must be defined in the Integration Builder.
D. An RFC destination must be defined on the sender system, pointing to the Integration
Server client.
Answer: A,B,D

SAP   C-TBIT44-71認定試験   C-TBIT44-71参考書   C-TBIT44-71過去問

NO.15 Assume that your customer has a scenario in which a database table needs to be
queried (i.e. to
perform a SELECT statement and obtain the result set).
What are the viable options for implementing this with the PI JDBC adapter?
A. Use the sender JDBC adapter to query the database asynchronously.
B. Use the sender JDBC adapter to query the database synchronously.
C. Use the receiver JDBC adapter to query the database synchronously.
D. Use the receiver JDBC adapter to query the database asynchronously.
Answer: A,C

SAP過去問   C-TBIT44-71認定試験   C-TBIT44-71練習問題

JPexamは最新の000-614問題集と高品質の700-501問題と回答を提供します。JPexamの1Z0-511 VCEテストエンジンとLOT-408試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のMB6-870 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク：http://www.jpexam.com/C-TBIT44-71_exam.html

SAP certification C-TBIT44-71 exam training programs

In the such a brilliant era of IT industry in the 21st century competition is very fierce. Naturally, SAP certification C-TBIT44-71 exam has become a very popular exam in the IT area. More and more people register for the exam and passing the certification exam is also those ambitious IT professionals' dream.

We will free provide you part of the exercises of SAP certification C-TBIT44-71 exam on the Internet to let you try to test our product's quality. After your trail you will find IT-Tests's exercises is the most comprehensive one and is what you want to.

Exam Code: C-TBIT44-71

Exam Name: SAP (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1))

IT-Tests's SAP certification C-TBIT44-71 exam testing exercises is very similar with real exam questions. If you choose IT-Tests's testing practice questions and answers, we will provide you with a year of free online update service. IT-Tests.com can 100% guarantee you to pass the exam, if you fail to pass the exam, we will full refund to you.

IT-Tests.com is a website to achieve dreams of many IT people. IT-Tests.com provide candidates participating in the IT certification exams the information they want to help them pass the exam. Do you still worry about passing SAP certification C-TBIT44-71 exam? Have you thought about purchasing an SAP certification C-TBIT44-71 exam counseling sessions to assist you? IT-Tests.com can provide you with this convenience. IT-Tests's training materials can help you pass the certification exam. IT-Tests's exercises are almost similar to real exams. With IT-Tests's accurate SAP certification C-TBIT44-71 exam practice questions and answers, you can pass SAP certification C-TBIT44-71 exam with a high score.

C-TBIT44-71 (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1)) Free Demo Download: http://www.it-tests.com/C-TBIT44-71.html

NO.1 You configure the sender RFC adapter to convert RFC calls from a sender to XML
messages. These
XML messages are then sent to the Integration Server or to the PCK.
What is the purpose of the RFC adapter parameter "Program ID"?
A. The Program ID is a unique identifier for outbound proxies.
B. The Program ID must uniquely describe the RFC sender communication channel in the
configured
application server gateway.
C. The Program ID identifies proxy classes for Service Interfaces.
D. The Program ID is used in correlation for binding abstract interfaces.
Answer: B

SAP braindump   C-TBIT44-71 exam dumps   C-TBIT44-71 exam   C-TBIT44-71

NO.2 If a system error occurs in a send step, an alert can be triggered for Alert Management
and the
integration process should then be terminated.
Where do you define the Alert Category for the appropriate Control Step?
A. Within the SLD
B. Within the transaction ALRTCATDEF on the Integration Server
C. Within the Enterprise Services Builder
D. Within the Process Editor
Answer: B

SAP practice test   C-TBIT44-71 test answers   C-TBIT44-71 test answers   C-TBIT44-71 exam simulations

NO.3 Which statements are correct when using the Receiver File adapter to process XML
messages?
A. The messages are processed based on a poll cycle.
B. The adapter can convert the XML payload into a flat file.
C. The adapter can FTP the file to a remote directory.
D. The quality of service can be 'best effort' (BE) only.
Answer: B,C

SAP study guide   C-TBIT44-71   C-TBIT44-71 certification training   C-TBIT44-71

NO.4 The communication between the Integration Server and the backend applications can
be achieved
without adapters.
Which message protocol should you use for this communication type?
A. RFC-XML
B. PI-SOAP Protocol
C. File
D. JDBC 2.0
Answer: B

SAP exam dumps   C-TBIT44-71 test   C-TBIT44-71   C-TBIT44-71 pdf   C-TBIT44-71

NO.5 Which of these operations can be performed by a Container Operation step?
A. Incrementing a counter variable.
B. Appending a message to a multiline container element.
C. Removing a message from a multiline container element.
D. Setting the value of an XML element of a message.
Answer: A,B

SAP study guide   C-TBIT44-71 answers real questions   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71

NO.6 The PI Mail adapter is used to send and receive emails. Which protocols are
supported?
A. SMTP
B. HTTP
C. IMAP4
D. POP3
Answer: A,C,D

SAP   C-TBIT44-71 test answers   C-TBIT44-71 exam simulations   C-TBIT44-71

NO.7 For the delivery mode of an integration process, you can choose between inbound
processing with or
without buffering.
Which of these statements correctly describes the Inbound processing mode?
A. SAP recommends the mode for inbound processing with buffering.
B. SAP recommends the mode for inbound processing without buffering.
C. If you select inbound processing without buffering, the qRFC entry returns an error when a
message is
to be delivered to a process instance for which no receive step is active.
D. If you select inbound processing with buffering and there is no active receive step
available to receive
an incoming message, the message is buffered in a separate, process-instance-specific
queue.
Answer: B,C,D

SAP exam prep   C-TBIT44-71 test questions   C-TBIT44-71 practice test   C-TBIT44-71

NO.8 You can create multiple configurations for one Integration Process without changing the
appropriate
process definition.
Which of these parameters allows you to achieve this behavior?
A. Process Signature
B. Container Definition
C. Correlation
D. Configurable Parameters in Conditions
Answer: D

SAP pdf   C-TBIT44-71 original questions   C-TBIT44-71

NO.9 You have implemented a scenario where IDocs are posted to an ERP system using the
receiver IDoc
adapter.
Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?
A. IDoc packages are not supported, unless all IDocs are collected by BPM.
B. Specific fields in the IDoc control record can be overwritten using the 'header mapping'
functionality in
the Receiver Agreement.
C. Quality of service EOIO (exactly once in order) is supported, provided that the target
system is a SAP
Web AS 6.40 or above.
D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best
effort) and EO
(exactly once) can be used.
E. A receiver communication channel must be defined in the Integration Builder.
Answer: B,C,E

SAP study guide   C-TBIT44-71 pdf   C-TBIT44-71

NO.10 To react to situations where it is not possible or not advisable to continue a process in
the normal way,
you can define exceptions.
Which statements correctly describe the triggering of exceptions?
A. A synchronous or asynchronous Send step can trigger an exception when a system error
occurs.
B. Every step type can trigger an exception when a permanent error occurs.
C. A Control step can trigger an exception.
D. A Transformation step can trigger an exception.
E. Exceptions can only be triggered by Control steps.
Answer: A,C,D

SAP   C-TBIT44-71 test answers   C-TBIT44-71   C-TBIT44-71 demo   C-TBIT44-71 study guide   C-TBIT44-71

NO.11 Which Process Integration objects can be used in an integration process?
A. All objects displayed in the navigation area of the Integration Builder.
B. All objects within the software component version of the integration process.
C. Only the objects within the namespace of the integration process.
D. All objects displayed in the Process Integration Scenario using this process.
Answer: B

SAP   C-TBIT44-71   C-TBIT44-71 test questions   C-TBIT44-71

NO.12 You are implementing an IDoc-based scenario using SAP Netweaver PI and more
specifically the
sender IDoc adapter.
Which of these steps are mandatory for the sender IDoc adapter to function properly?
A. IDoc metadata must be imported into the Enterprise Services Repository.
B. The Logical System name (ALE name) for the Business System must be defined in the
SLD.
C. A sender communication channel must be defined in the Integration Builder.
D. An RFC destination must be defined on the sender system, pointing to the Integration
Server client.
Answer: A,B,D

SAP   C-TBIT44-71   C-TBIT44-71

NO.13 You have created a deadline branch. When the deadline has expired, the integration
process should be
canceled.
How can this be achieved?
A. In the deadline branch, insert a control step that cancels the process.
B. The process is automatically stopped once the deadline has expired.
C. As the process can only be stopped by the administrator, a control step that raises an alert
to inform
the administrator has to be inserted.
D. Insert a switch with an appropriate condition to stop the process.
Answer: A

SAP certification training   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71

NO.14 Assume that your customer has a scenario in which a database table needs to be
queried (i.e. to
perform a SELECT statement and obtain the result set).
What are the viable options for implementing this with the PI JDBC adapter?
A. Use the sender JDBC adapter to query the database asynchronously.
B. Use the sender JDBC adapter to query the database synchronously.
C. Use the receiver JDBC adapter to query the database synchronously.
D. Use the receiver JDBC adapter to query the database asynchronously.
Answer: A,C

SAP exam prep   C-TBIT44-71   C-TBIT44-71 demo   C-TBIT44-71   C-TBIT44-71 questions

NO.15 A special aspect in B2B business processes is that the business partners involved in
these processes
do not usually provide information about their internal system landscape.
Which configuration objects are relevant for B2B configuration?
A. Receiver Determination
B. Communication Party
C. Software Component Version (SWCV)
D. Communication Channel
Answer: A,B,D

SAP   C-TBIT44-71 dumps   C-TBIT44-71 demo   C-TBIT44-71 test questions

IT-Tests.com SAP C-TBIT44-71 exam study guide can be a lighthouse in your career. Because it contains all C-TBIT44-71 exam information. Select IT-Tests.com, it can help you to pass the exam. This is absolutely a wise decision. IT-Tests.com is your helper, you can get double the result, only need to pay half the effort.

SAP certification C-TBIT44-71 exam training methods

Perhaps you have also seen the related training tools about SAP certification C-TBIT44-71 exam on other websites, but our IT-Tests.com has a pivotal position in the field of IT certification exam. IT-Tests.com research materials can 100% guarantee you to pass the exam. With IT-Tests.com your career will change and you can promote yourself successfully in the IT area. When you select IT-Tests.com you'll really know that you are ready to pass SAP certification C-TBIT44-71 exam. We not only can help you pass the exam successfully, but also will provide you with a year of free service.

You have IT-Tests.com SAP C-TBIT44-71 certification exam training materials, the same as having a bright future. IT-Tests.com SAP C-TBIT44-71 exam certification training is not only the cornerstone to success, and can help you to play a greater capacity in the IT industry. The training materials covering a wide range, not only to improve your knowledge of the culture, the more you can improve the operation level. If you are still waiting, still hesitating, or you are very depressed how through SAP C-TBIT44-71 certification exam. Do not worry, the IT-Tests.com SAP C-TBIT44-71 exam certification training materials will help you solve these problems.

Exam Code: C-TBIT44-71

Exam Name: SAP (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1))

IT-Tests.com is website that can help a lot of IT people realize their dreams. If you have a IT dream， then quickly click the click of IT-Tests.com. It has the best training materials, which is IT-Tests.com;s SAP C-TBIT44-71 exam training materials. This training materials is what IT people are very wanted. Because it will make you pass the exam easily, since then rise higher and higher on your career path.

IT-Tests.com's SAP C-TBIT44-71 exam training materials is no other sites in the world can match. Of course, this is not only the problem of quality, it goes without saying that our quality is certainly the best. More important is that IT-Tests.com's exam training materials is applicable to all the IT exam. So the website of IT-Tests.com can get the attention of a lot of candidates. They believe and rely on us. It is also embodied the strength of our IT-Tests.com site. The strength of IT-Tests.com is embodied in it. Our exam training materials could make you not help recommend to your friends after you buy it. Because it's really a great help to you.

If you feel that you purchase IT-Tests.com SAP C-TBIT44-71 exam training materials, and use it to prepare for the exam is an adventure, then the whole of life is an adventure. Gone the furthest person is who are willing to do it and willing to take risks. Not to mention that IT-Tests.com SAP C-TBIT44-71 exam training materials are many candidates proved in practice. It brings the success of each candidate is also real and effective. Dreams and hopes are important, but more important is to go to practice and prove. The IT-Tests.com SAP C-TBIT44-71 exam training materials will be successful, select it, you have no reason unsuccessful !

C-TBIT44-71 (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1)) Free Demo Download: http://www.it-tests.com/C-TBIT44-71.html

NO.1 Which statements are correct when using the Receiver File adapter to process XML
messages?
A. The messages are processed based on a poll cycle.
B. The adapter can convert the XML payload into a flat file.
C. The adapter can FTP the file to a remote directory.
D. The quality of service can be 'best effort' (BE) only.
Answer: B,C

SAP answers real questions   C-TBIT44-71 exam dumps   C-TBIT44-71

NO.2 You configure the sender RFC adapter to convert RFC calls from a sender to XML
messages. These
XML messages are then sent to the Integration Server or to the PCK.
What is the purpose of the RFC adapter parameter "Program ID"?
A. The Program ID is a unique identifier for outbound proxies.
B. The Program ID must uniquely describe the RFC sender communication channel in the
configured
application server gateway.
C. The Program ID identifies proxy classes for Service Interfaces.
D. The Program ID is used in correlation for binding abstract interfaces.
Answer: B

SAP braindump   C-TBIT44-71 practice test   C-TBIT44-71 questions   C-TBIT44-71   C-TBIT44-71 exam simulations   C-TBIT44-71

NO.3 Which of these operations can be performed by a Container Operation step?
A. Incrementing a counter variable.
B. Appending a message to a multiline container element.
C. Removing a message from a multiline container element.
D. Setting the value of an XML element of a message.
Answer: A,B

SAP   C-TBIT44-71 questions   C-TBIT44-71 certification   C-TBIT44-71

NO.4 Which Process Integration objects can be used in an integration process?
A. All objects displayed in the navigation area of the Integration Builder.
B. All objects within the software component version of the integration process.
C. Only the objects within the namespace of the integration process.
D. All objects displayed in the Process Integration Scenario using this process.
Answer: B

SAP test   C-TBIT44-71 braindump   C-TBIT44-71 dumps

NO.5 For the delivery mode of an integration process, you can choose between inbound
processing with or
without buffering.
Which of these statements correctly describes the Inbound processing mode?
A. SAP recommends the mode for inbound processing with buffering.
B. SAP recommends the mode for inbound processing without buffering.
C. If you select inbound processing without buffering, the qRFC entry returns an error when a
message is
to be delivered to a process instance for which no receive step is active.
D. If you select inbound processing with buffering and there is no active receive step
available to receive
an incoming message, the message is buffered in a separate, process-instance-specific
queue.
Answer: B,C,D

SAP   C-TBIT44-71 pdf   C-TBIT44-71   C-TBIT44-71

NO.6 You are implementing an IDoc-based scenario using SAP Netweaver PI and more
specifically the
sender IDoc adapter.
Which of these steps are mandatory for the sender IDoc adapter to function properly?
A. IDoc metadata must be imported into the Enterprise Services Repository.
B. The Logical System name (ALE name) for the Business System must be defined in the
SLD.
C. A sender communication channel must be defined in the Integration Builder.
D. An RFC destination must be defined on the sender system, pointing to the Integration
Server client.
Answer: A,B,D

SAP exam dumps   C-TBIT44-71   C-TBIT44-71 certification   C-TBIT44-71   C-TBIT44-71 practice test

NO.7 A special aspect in B2B business processes is that the business partners involved in
these processes
do not usually provide information about their internal system landscape.
Which configuration objects are relevant for B2B configuration?
A. Receiver Determination
B. Communication Party
C. Software Component Version (SWCV)
D. Communication Channel
Answer: A,B,D

SAP exam   C-TBIT44-71 test questions   C-TBIT44-71 questions   C-TBIT44-71

NO.8 You can create multiple configurations for one Integration Process without changing the
appropriate
process definition.
Which of these parameters allows you to achieve this behavior?
A. Process Signature
B. Container Definition
C. Correlation
D. Configurable Parameters in Conditions
Answer: D

SAP   C-TBIT44-71 practice test   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71 test

NO.9 Assume that your customer has a scenario in which a database table needs to be
queried (i.e. to
perform a SELECT statement and obtain the result set).
What are the viable options for implementing this with the PI JDBC adapter?
A. Use the sender JDBC adapter to query the database asynchronously.
B. Use the sender JDBC adapter to query the database synchronously.
C. Use the receiver JDBC adapter to query the database synchronously.
D. Use the receiver JDBC adapter to query the database asynchronously.
Answer: A,C

SAP   C-TBIT44-71 exam simulations   C-TBIT44-71 practice test

NO.10 To react to situations where it is not possible or not advisable to continue a process in
the normal way,
you can define exceptions.
Which statements correctly describe the triggering of exceptions?
A. A synchronous or asynchronous Send step can trigger an exception when a system error
occurs.
B. Every step type can trigger an exception when a permanent error occurs.
C. A Control step can trigger an exception.
D. A Transformation step can trigger an exception.
E. Exceptions can only be triggered by Control steps.
Answer: A,C,D

SAP   C-TBIT44-71   C-TBIT44-71 certification training   C-TBIT44-71 exam simulations

NO.11 You have implemented a scenario where IDocs are posted to an ERP system using the
receiver IDoc
adapter.
Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?
A. IDoc packages are not supported, unless all IDocs are collected by BPM.
B. Specific fields in the IDoc control record can be overwritten using the 'header mapping'
functionality in
the Receiver Agreement.
C. Quality of service EOIO (exactly once in order) is supported, provided that the target
system is a SAP
Web AS 6.40 or above.
D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best
effort) and EO
(exactly once) can be used.
E. A receiver communication channel must be defined in the Integration Builder.
Answer: B,C,E

SAP exam prep   C-TBIT44-71 exam dumps   C-TBIT44-71 test

NO.12 The PI Mail adapter is used to send and receive emails. Which protocols are
supported?
A. SMTP
B. HTTP
C. IMAP4
D. POP3
Answer: A,C,D

SAP   C-TBIT44-71 test   C-TBIT44-71 original questions   C-TBIT44-71

NO.13 You have created a deadline branch. When the deadline has expired, the integration
process should be
canceled.
How can this be achieved?
A. In the deadline branch, insert a control step that cancels the process.
B. The process is automatically stopped once the deadline has expired.
C. As the process can only be stopped by the administrator, a control step that raises an alert
to inform
the administrator has to be inserted.
D. Insert a switch with an appropriate condition to stop the process.
Answer: A

SAP   C-TBIT44-71   C-TBIT44-71

NO.14 The communication between the Integration Server and the backend applications can
be achieved
without adapters.
Which message protocol should you use for this communication type?
A. RFC-XML
B. PI-SOAP Protocol
C. File
D. JDBC 2.0
Answer: B

SAP   C-TBIT44-71   C-TBIT44-71 braindump   C-TBIT44-71 pdf

NO.15 If a system error occurs in a send step, an alert can be triggered for Alert Management
and the
integration process should then be terminated.
Where do you define the Alert Category for the appropriate Control Step?
A. Within the SLD
B. Within the transaction ALRTCATDEF on the Integration Server
C. Within the Enterprise Services Builder
D. Within the Process Editor
Answer: B

SAP exam prep   C-TBIT44-71   C-TBIT44-71   C-TBIT44-71 pdf   C-TBIT44-71 test answers

IT-Tests.com SAP C-TBIT44-71 exam questions and answers provide you test preparation information with everything you need. About SAP C-TBIT44-71 exam, you can find these questions from different web sites or books, but the key is logical and connected. Our questions and answers will not only allow you effortlessly through the exam first time, but also can save your valuable time.