显示标签为“PW0-250”的博文。显示所有博文
显示标签为“PW0-250”的博文。显示所有博文

2013年12月26日星期四

CWNP PW0-250認定試験の準備をすれば勉強方法を教える

弊社のCWNPのPW0-250勉強資料を利用したら、きっと試験を受けるための時間とお金を節約できます。JPexamのCWNPのPW0-250問題集を買う前に、一部の問題と解答を無料にダウンロードすることができます。PDFのバージョンとソフトウェアのバージョンがありますから、ソフトウェアのバージョンを必要としたら、弊社のカスタマーサービススタッフから取得してください。

JPexamのPW0-250問題集はあなたを楽に試験の準備をやらせます。それに、もし最初で試験を受ける場合、試験のソフトウェアのバージョンを使用することができます。これは完全に実際の試験雰囲気とフォーマットをシミュレートするソフトウェアですから。このソフトで、あなたは事前に実際の試験を感じることができます。そうすれば、実際のPW0-250試験を受けるときに緊張をすることはないです。ですから、心のリラックスした状態で試験に出る問題を対応することができ、あなたの正常なレベルをプレイすることもできます。

近年、IT領域で競争がますます激しくなります。IT認証は同業種の欠くことができないものになりました。あなたはキャリアで良い昇進のチャンスを持ちたいのなら、JPexamのCWNPのPW0-250試験トレーニング資料を利用してCWNPの認証の証明書を取ることは良い方法です。現在、CWNPのPW0-250認定試験に受かりたいIT専門人員がたくさんいます。JPexamの試験トレーニング資料はCWNPのPW0-250認定試験の100パーセントの合格率を保証します。

CWNPのPW0-250認定試験は人気があるIT認証に属するもので、野心家としてのIT専門家の念願です。このような受験生はPW0-250認定試験で高い点数を取得して、自分の構成ファイルは市場の需要と互換性があるように充分な準備をするのは必要です。

IT認証試験を受かるかどうかが人生の重要な変化に関連することを、受験生はみんなよく知っています。JPexamは低い価格で高品質の迫真の問題を受験生に提供して差し上げます。JPexamの製品もコスト効率が良く、一年間の無料更新サービスを提供しています。当社の認定トレーニングの材料は、すぐに入手できます。当社のサイトは答案ダンプのリーディングプロバイダーで、あなたが利用したい最新かつ最正確の試験認定トレーニング材料、いわゆる試験問題と解答を提供しています。

CWNPのPW0-250試験に合格することは容易なことではなくて、良い訓練ツールは成功の保証でJPexamは君の試験の問題を準備してしまいました。君の初めての合格を目標にします。

試験番号:PW0-250問題集
試験科目:Certified Wireless Design Professional (CWDP)
最近更新時間:2013-12-26
問題と解答:全60問
100%の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/PW0-250_exam.html

NO.1 When a WLAN controller transmits an Ethernet frame that has an IEEE 802.11 frame as its payload to a
lightweight AP, what type of QoS marks can be applied to the Ethernet frame and/or its payload? (Choose
3)
A. IEEE 802.1Q PCP marks in the Ethernet frame header
B. User Priority marks in the IEEE 802.11 frame header
C. Throughput subscription marks in the Ethernet frame header
D. MPLS tags from the Label Edge Router (LER)
E. DSCP marks to the ToS bits in the encapsulating IP packet header
F. RSVP tag if RTP is the payload of the IEEE 802.11 frame
Answer: A,B,E

CWNP認定証   PW0-250認定資格   PW0-250

NO.2 In a manufacturing facility with highly reflective materials, you are planning an upgrade to your existing
802.11b solution. You have chosen a dual-band 802.11n infrastructure product for this purpose. Your
client applications include:
Handheld scanners
for inventory management
Toughbooks (laptops)
mounted on forklifts for inventory and workflow management
VoWiFi phones
used by select employees throughout the facility You are evaluating all of the 802.11n
enhancements and determining which features to enable for your environment and applications.
In this scenario, what 802.11n enhancements should NOT be enabled on the 2.4 GHz radio of the new
APs? (Choose 2)
A. 40 MHz channels
B. Short guard intervals
C. Block Acknowledgments
D. Frame aggregation
E. MRC
F. STBC
Answer: A,B

CWNP   PW0-250   PW0-250過去問   PW0-250

NO.3 When deploying long-distance 802.11 bridge links (10 miles / 16 km), what parameter may be critical for
improving data flow by reducing retries caused by the long distances.?
A. The sequence control field value
B. The acknowledgement timeout threshold
C. The minimum transmit data rate value
D. The CTS-to-self threshold
E. The Beacon interval
F. The PHY parameter set field
Answer: B

CWNP問題集   PW0-250問題集   PW0-250認証試験   PW0-250認定試験   PW0-250参考書

NO.4 After surveying for the ideal mounting locations for APs, you have been asked to compromise RF
propagation optimization due to aesthetic concerns raised by your customer. In the end, you ve decided to
mount the APs in the ideal locations and paint the APs so they go unnoticed in the environment.
What is a valid recommendation or consideration when painting APs? (Choose 2)
A. Always use paints with metallic dye in them to prevent potential RF propagation impact.
B. Do not paint the notification LEDs on the AP, but configure them to be dim or turned off altogether until
troubleshooting is required.
C. Painting APs may void the product manufacturer s warranty.
D. Most AP models for indoor environments come in a variety of form factors and colors. Painting is never
recommended.
E. Painting APs always introduces a fire and gas emissions hazard and should be avoided for all indoor
APs.
Answer: B,C

CWNP認定資格   PW0-250   PW0-250練習問題   PW0-250認証試験   PW0-250過去問

NO.5 Given: Use Exhibit 1, 2, and 3 to answer the question.
The azimuth and elevation charts for which type of antenna are shown in Exhibit 1?
A. Figure 1
B. Figure 2
C. Figure 3
D. Figure 4
E. Figure 5
F. Figure 6
Answer: C

CWNP認定証   PW0-250   PW0-250   PW0-250参考書

NO.6 Your customer location is equipped with DAS, originally deployed to relay a GSM signal indoors and
provide 802.11 data coverage to static stations. What type of wireless application would be least likely to
be supported by this RF distribution model?
A. On-demand video streaming over wireless
B. Data connection with frequent roaming
C. Location-based services for wireless assets or RFID tags
D. VoWLAN if the codec is G.729.
E. FTP over implicit TLS/SSL
Answer: C

CWNP   PW0-250参考書   PW0-250   PW0-250認証試験   PW0-250   PW0-250問題集

NO.7 According to WLAN security design best practices, what is true of the EAP properties shown in the
exhibit?
A. The Validate server certificate
checkbox should be checked if you purchased a third-party SSL
certificate for the AS, but left unchecked if you have a self-signed certificate for the AS.
B. The Validate server certificate
checkbox should always be checked to prevent MITM attacks from
rogue authentication servers.
C. The Trusted Root Certification Authorities
list is provided to identify the certificate that the client
should send to the AS for client authentication.
D. The Do not prompt user to authorize new servers or trusted certification authorities
box should be
checked only for administrative users.
E. The Enable Identity Privacy
checkbox and anonymous name field are only useful for networks
supporting EAP-LEAP.
Answer: B

CWNP   PW0-250過去問   PW0-250

NO.8 Which definition correctly describes the local MAC
variation of the centralized WLAN architecture?
A. All MAC functions are performed by the AP. A minimal subset of network control is offloaded to the
WLAN controller along with management and monitoring functions.
B. PHY functions are performed directly by the AP. MAC functions are divided almost equally between the
WLAN controller and the AP, according to the time sensitivity of the feature or service.
C. The AP provides the RF termination point for the WLAN, but performs very few of the WLAN functions
or services. The WLAN controller performs all MAC functions and the AP is very simple and lightweight.
D. All RF-, data-, and control-related WLAN functions are performed by the AP. APs coordinate network
services with one another and are managed by a WNMS, so no WLAN controller is used in this
architecture.
Answer: A

CWNP認定試験   PW0-250認証試験   PW0-250   PW0-250認定証   PW0-250

NO.9 In a centralized WLAN architecture, what new problem may arise when you change the data forwarding
model from centralized to distributed? (Choose 2)
A. APs that were designed for a centralized forwarding model may not support all features in distributed
forwarding mode.
B. The Ethernet switch ports to which APs are connected may need to be reconfigured to support VLAN
tagging and QoS at the network edge.
C. All RRM controls will also need to be distributed to a master AP that acts as a channel and transmit
power arbiter for other APs in the ESS.
D. Centralized control functions, such as key management and distribution, RRM, and load balancing will
no longer be supported.
E. APs will not have the processing capabilities to support AES-CCMP, so TKIP will be the recommended
encryption method.
Answer: A,B

CWNP   PW0-250練習問題   PW0-250認証試験   PW0-250

NO.10 One of your customers plans on providing wireless coverage to a warehouse facility. After performing an
initial walkthrough, you collect the following information:
-The central part of the warehouse is between 400 and 600 feet (122 to 183 meters) from the warehouse
switches mounted on the walls.
-The warehouse map was provided by the customer and is displayed in the exhibit.
-The warehouse storage is composed of metallic racks with varying inventory levels and contents, from
electronics and plastic toys to food pallets and juice bottles.
-Workers need basic data coverage from their working location, and are not highly mobile. They usually
work from one single aisle, and their laptop is on a cart with wheels.
What would be your recommendation to provide coverage to the central area (indicated by a blue circle)
of the warehouse?
A. Equip workers laptops with a directional antenna and install APs less than 328 feet (100m) away from
the switch.
B. In this case, extend the cable length just beyond 328 feet (100 m) and position APs as close as
possible to the central area of the warehouse.
C. Position APs along the walls, and equip the APs with Yagi antennas to cover the central area.
D. Install APs for client access in the central area and use a mesh backhaul link to connect to the DS.
Answer: D

CWNP   PW0-250練習問題   PW0-250過去問   PW0-250参考書

JPexamは最新の000-400問題集と高品質のC_TADM53_70問題と回答を提供します。JPexamの70-687 VCEテストエンジンと646-206試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の70-484 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/PW0-250_exam.html

2013年8月5日星期一

PW0-105 PW0-250 PW0-204 PW0-070 best CWNP certification exam questions and answers free download

IT-Tests.com is a website specifically provide the certification exam information sources for IT professionals. Through many reflects from people who have purchase IT-Tests's products, IT-Tests.com is proved to be the best website to provide the source of information about certification exam. The product of IT-Tests.com is a very reliable training tool for you. The answers of the exam exercises provided by IT-Tests.com is very accurate. Our IT-Tests's senior experts are continuing to enhance the quality of our training materials.


In order to pass the CWNP PW0-105 PW0-250 PW0-204 PW0-070 exam, selecting the appropriate training tools is very necessary. And the study materials of CWNP PW0-105 PW0-250 PW0-204 PW0-070 exam is a very important part. IT-Tests.com can provide valid materials to pass the CWNP PW0-105 PW0-250 PW0-204 PW0-070 exam. The IT experts in IT-Tests.com are all have strength aned experience. Their research materials are very similar with the real exam questions . IT-Tests.com is a site that provide the exam materials to the people who want to take the exam. and we can help the candidates to pass the exam effectively.


If you use the IT-Tests.com CWNP PW0-105 PW0-250 PW0-204 PW0-070 study materials, you can reduce the time and economic costs of the exam. It can help you to pass the exam successfully. Before you decide to buy our CWNP PW0-105 PW0-250 PW0-204 PW0-070 exam materials, you can download our free test questions, including the PDF version and the software version. If you need software versions please do not hesitate to obtain a copy from our customer service staff.


Perhaps you have also seen the related training tools about CWNP certification PW0-105 PW0-250 PW0-204 PW0-070 exam on other websites, but our IT-Tests.com has a pivotal position in the field of IT certification exam. IT-Tests.com research materials can 100% guarantee you to pass the exam. With IT-Tests.com your career will change and you can promote yourself successfully in the IT area. When you select IT-Tests.com you'll really know that you are ready to pass CWNP certification PW0-105 PW0-250 PW0-204 PW0-070 exam. We not only can help you pass the exam successfully, but also will provide you with a year of free service.


Exam Code: PW0-105

Exam Name: CWNP (Certified Wireless Network Administrator (CWNA))

Exam Code: PW0-250

Exam Name: CWNP (Certified Wireless Design Professional (CWDP) )

Exam Code: PW0-204

Exam Name: CWNP (Certified Wireless Security Professional (CWSP))

Exam Code: PW0-070

Exam Name: CWNP (Certified Wireless Technology Specialist)

PW0-105 (Certified Wireless Network Administrator (CWNA)) Free Demo Download: http://www.it-tests.com/PW0-105.html


NO.1 What word describes the bending of an RF signal as it passes from one medium to another medium of
a different density?
A. Diffraction
B. Reflection
C. Refraction
D. Diffusion
E. Scattering
Answer: C

CWNP   PW0-105   PW0-105 exam simulations   PW0-105

NO.2 Given:
ABC Company performs top-secret government contract work and has recently purchased an
802.11 Wireless Intrusion Prevention System (WIPS) to enforce their "NO WIRELESS" network security
policy.
What attack type cannot be recognized by the WIPS?
A. Deauthentication
B. MAC Spoofing
C. Protocol Jamming
D. Eavesdropping
E. RF Jamming
Answer: D

CWNP   PW0-105   PW0-105   PW0-105 test answers   PW0-105

NO.3 Why is it recommended for a wireless network administrator to disable 1 Mbps and 2 Mbps data rates
on the WLAN infrastructure? (Choose two)
A. To improve capacity in the BSS
B. To reduce the size of the AP's effective service area
C. To prevent 802.11b devices from associating
D. To maximize the range of the highest data rates
E. To prevent VoWiFi multicast frames
F. To enable support for long preambles
Answer: A,B

CWNP   PW0-105   PW0-105   PW0-105 certification training

NO.4 What 802.11n technologies require MIMO support on both the transmitter and receiver? (Choose 2)
A. Spatial multiplexing
B. Transmit beamforming
C. Maximal ratio combining
D. Space-time block coding
E. Cyclic shift diversity
F. Short guard intervals
Answer: A,D

CWNP test answers   PW0-105   PW0-105 certification   PW0-105

NO.5 When replacing the antenna of a WLAN device with a similar antenna type that has a higher passive
gain, what antenna characteristic will decrease?
A. Beamwidth
B. Range
C. Active gain
D. Receive sensitivity
E. Fresnel Zone size
Answer: A

CWNP demo   PW0-105   PW0-105 demo   PW0-105   PW0-105 exam prep

NO.6 In a long-distance RF link, what statement about Fade Margin is true?
A. Fade Margin is an additional pad of signal strength designed into the RF system to compensate for
unpredictable signal fading.
B. The Fade Margin of a long-distance radio link should be equivalent to the receiver's antenna gain.
C. A Fade Margin is unnecessary on a long-distance RF link if more than 80% of the first Fresnel zone is
clear of obstructions.
D. The Fade Margin is a measurement of signal loss through free space, and is a function of frequency
and distance.
Answer: A

CWNP study guide   PW0-105   PW0-105

NO.7 Given:
Network users and IT personnel at a large machinery manufacturer have been discussing the potential
uses and benefits of implementing an indoor WLAN. The network administrator and network manager
have requested a meeting of senior management personnel to discuss a WLAN implementation before
taking any site survey or implementation steps. The first order of discussion in the meeting is corporate
policy concerning implementation and use of WLAN technology.
What specific topics are appropriate in this policy meeting? (Choose two)
A. Vendor hardware recommendations
B. Business justification
C. User productivity impact
D. Antenna types
E. Obtaining permits and zoning requirements
Answer: B,C

CWNP demo   PW0-105 exam prep   PW0-105 original questions   PW0-105 dumps

NO.8 Given: You are an independent contractor, hired to perform an indoor site survey and network design
for ABC Hotel. The network will support both hotel staff and guest users. You are interviewing the network
manager to determine business, performance, and security requirements for the future 802.11 WLAN.
What questions should you ask the IT manager? (Choose two)
A. What data cabling is currently installed in the rooms and throughout the hotel?
B. How much RF loss do you expect between hotel rooms?
C. Where are the RF dead zones located within the facility?
D. What types of applications will be used by the hotel staff?
E. Are there any radar systems in use at the hotel that would conflict with the WLAN?
Answer: A,D

CWNP   PW0-105 certification   PW0-105

NO.9 What statement describes the authorization component of a AAA implementation?
A. Verifying that a user is who he says he is
B. Validating client device credentials against a database
C. Logging the details of user network behavior in order to review it at a later time
D. Granting access to specific network services according to a user profile
E. Implementing a WIPS as a full-time monitoring solution to enforce policies
Answer: D

CWNP original questions   PW0-105   PW0-105   PW0-105

NO.10 What component of the 802.11 standard allows stations to reserve access to the RF medium for a
specified period of time?
A. Long slot times
B. DTIM Interval
C. Listen Interval
D. Probe Request frames
E. RTS or CTS frames
Answer: E

CWNP   PW0-105 certification training   PW0-105   PW0-105 questions

NO.11 ABC Company has a 2.4 and 5 GHz WLAN deployment supporting four bands in the 5 GHz range
(UNII 1, UNII 2, UNII 2e, and UNII 3). DFS functionality is enabled as required by the regulatory domain.
Band steering is also enabled to encourage dual-band clients to use frequency bands with more capacity.
Your performance analysis shows that many dual-band VoWiFi client devices will move back and forth
between 2.4 and 5 GHz as the user roams throughout the building. All APs have 2.4 and 5 GHz radios
enabled.
This "band hopping" behavior is viewed by network staff to be undesirable. What is the most likely cause
of the unpredictable client band selection behavior?
A. Interference from 5 GHz radar sources has increased frame corruption and retries on channels 36-48
in UNII 1.
B. 5 GHz frequencies offer better RF penetration than 2.4 GHz, but 2.4 GHz offers more voice call
capacity and lower latency than 5 GHz.
C. The voice client does not support DFS, and therefore experiences some 5 GHz coverage holes as it
moves through the network.
D. The client's band selection algorithm prefers 5 GHz, but band steering behavior usually steers 75-85%
of client devices to 2.4 GHz.
Answer: C

CWNP answers real questions   PW0-105   PW0-105 dumps   PW0-105 exam dumps

NO.12 Given: Your consulting firm has recently been hired to complete a site survey for ABC Company. Your
engineers use predictive modeling software for surveying, but ABC Company insists on a pre-deployment
site visit.
What tasks should be performed as part of the pre-deployment visit to prepare for a predictive survey?
(Choose two)
A. With a spectrum analyzer, identify the type, amplitude, and location of RF interference sources, if any
are present.
B. Evaluate the building materials at ABC's facility and confirm that the floor plan documents are
consistent with the actual building.
C. Validate that the AP transmit power and antenna type is identical for each AP in ABC's existing
deployment.
D. Collect information about ABC Company's security requirements and the current configuration of their
RADIUS and user database servers.
E. Simultaneously capture and analyze data on each 802.11 channel to establish a baseline for potential
network capacity and throughput.
Answer: A,B

CWNP practice test   PW0-105 certification training   PW0-105   PW0-105

NO.13 What facts are true regarding controllers and APs in a Split MAC architecture? (Choose 2)
A. An IP tunnel is established between the AP and controller for AP management and control functions.
B. Using centralized data forwarding, APs never tag Ethernet frames with VLAN identifiers or 802.1p CoS.
C. With 802.1X/EAP security, the AP acts as the supplicant and the controller acts as the authenticator.
D. Management and data frame types must be processed locally by the AP, while control frame types
must be sent to the controller.
E. In a distributed (local bridging) data forwarding model, the AP handles frame encryption and
decryption.
Answer: A,E

CWNP   PW0-105 test questions   PW0-105 exam   PW0-105 certification

NO.14 During the discovery and connectivity process, client and AP stations exchange information about their
supported data rates. After the association, how do client and AP stations select the supported data rate
that will be used to send an 802.11 data frame?
A. During the association, the client and AP agree to use the same transmit rate, but either station can
request a change at any time after the association.
B. The client and AP each choose the optimal data rate to use independently of one another, based on
their own experience of the RF link.
C. The client and AP may use different transmit rates, but the AP determines the data rate that will be
used by each client station in the BSS.
D. The client and AP may use different transmit rates, but the client determines the data rate that it will
use and the data rate that the AP will use when communicating to the client.
E. The client and AP may use a different transmit rates, but the transmit rate is determined by the peer
station, based on the peer's experience of the RF link.
Answer: B

CWNP   PW0-105 exam prep   PW0-105 test answers   PW0-105   PW0-105 questions

NO.15 What answers correctly complete the following sentence?
____________ and ____________ carrier sense functions are used to determine whether the wireless
medium is idle or busy. (Choose 2)
A. Passive
B. Pseudo-random
C. Virtual
D. Active
E. Physical
F. Interframe
G. Vector
Answer: C,E

CWNP certification training   PW0-105 practice test   PW0-105 demo   PW0-105 test questions   PW0-105 exam

NO.16 Given: You are the network administrator for ABC Company. Your manager has recently attended a
wireless security seminar. The seminar speaker taught that a wireless network could be hidden from
potential intruders if you disabled the broadcasting of the SSID in Beacons and configured the access
points not to respond to Probe Request frames that have a null SSID field.
Your manager suggests implementing these security practices. What response should you give to this
suggestion? (Choose two)
A. Any 802.11 protocol analyzer can see the SSID in clear text in frames other than Beacons and Probe
Response frames. This negates any security benefit of trying to hide the SSID in Beacons and Probe
Response frames.
B. This security practice prevents manufacturers' client utilities from detecting the SSID. As a result, the
SSID cannot be obtained by attackers, except through social engineering, guessing, or use of a WIPS.
C. Although it does not benefit the security posture, hiding the SSID in Beacons and Probe Response
frames can be helpful for preventing some users (such as guests) from attempting to connect to the
corporate network.
D. Any tenants in the same building using advanced penetration testing tools will be able to obtain the
SSID by exploiting WPA EAPOL-Key exchanges. This poses an additional risk of exposing the WPA key.
E. To improve security by hiding the SSID, the AP and client stations must both be configured to remove
the SSID from association request and response frames. Most WLAN products support this.
Answer: A,C

CWNP   PW0-105 questions   PW0-105 practice test   PW0-105   PW0-105   PW0-105 exam dumps

NO.17 What WLAN system feature is required to produce a scenario with the following configuration on a
single access point? (Choose 2)
1. SSID = Guest / BSSID = AA:AA:AA:AA:AA:AA /
VLAN = 22 / Subnet = 192.168.22.0 / RF Channel = 6
2. SSID = Corporate / BSSID = BB:BB:BB:BB:BB:BB /
VLAN = 33 / Subnet = 192.168.33.0 / RF Channel = 6 / User Type A
SSID = Corporate / BSSID = BB:BB:BB:BB:BB:BB /
VLAN = 44 / Subnet = 192.168.44.0 / RF Channel = 6 / User Type B
A. Multiple WLAN Profiles
B. Call Admission Control
C. Virtual Cell with SCA
D. Access Categories
E. User-based authentication
F. Dual-radio AP hardware
G. Integrated DHCP server
Answer: A,E

CWNP   PW0-105 certification training   PW0-105 exam dumps   PW0-105   PW0-105

NO.18 What statement best describes the manual RF site survey report?
A. It is a series of notes taken during the interview with the network manager and given to the site survey
project manager.
B. It is a one-page network inspection summary used to create a certificate of network compliance.
C. It contains the results from the RF coverage, capacity, and interference analysis.
D. It is an internal document used by the site surveying firm for network deployment, and is not usually
shown to the client.
E. It states the customer requirements, business justification, and a detailed budget for the WLAN.
Answer: C

CWNP   PW0-105   PW0-105 study guide

NO.19 Given: You were previously on-site at ABC's facility to conduct a pre-deployment RF site survey. The
WLAN has been deployed according to your recommendations and you are on-site again to perform a
network validation.
When performing this type of post-deployment RF site survey for VoWiFi, what are two steps that must be
performed? (Choose two)
A. Coverage analysis to verify appropriate coverage and roaming boundaries
B. Spectrum analysis to locate and identify RF interference sources
C. Hidden node analysis to identify and relocate existing hidden nodes
D. Protocol analysis to discover channel use on neighboring APs
E. Application analysis with an active phone call on a VoWiFi handset
Answer: A,E

CWNP   PW0-105 exam simulations   PW0-105

NO.20 What feature(s) are most likely to be supported by 802.11 enterprise-class WLAN controllers? (Choose
4)
A. Link aggregation / port trunking
B. 802.1p and DSCP QoS
C. BGP and Frame Relay
D. Captive web portals
E. IGMP snooping
Answer: A,B,D,E

CWNP test questions   PW0-105 braindump   PW0-105   PW0-105 answers real questions