IT-Tests.com can provide you a pertinence training and high quality exercises, which is your best preparation for your first time to attend Juniper certification JN0-522 exam. IT-Tests's exercises are very similar with the real exam, which can ensure you a successful passing the Juniper certification JN0-522 exam. If you fail the exam, we will give you a full refund.
If you choose the help of IT-Tests, we will spare no effort to help you pass the exam. Moreover, we also provide you with a year of free after-sales service to update the exam practice questions and answers. Do not hesitate! Please select IT-Tests, it will be the best guarantee for you to pass JN0-522 certification exam. Now please add IT-Tests.com to your shopping cart.
You can free download part of IT-Tests's exercises and answers about Juniper certification JN0-522 exam as a try, then you will be more confident to choose our IT-Tests's products to prepare your Juniper certification JN0-522 exam. Please add IT-Tests's products in you cart quickly.
IT-Tests.com is a specialized IT certification exam training website which provide you the targeted exercises and current exams. We focus on the popular Juniper certification JN0-522 exam and has studied out the latest training programs about Juniper certification JN0-522 exam, which can meet the needs of many people. Juniper JN0-522 certification is a reference of many well-known IT companies to hire IT employee. So this certification exam is very popular now. IT-Tests.com is also recognized and relied by many people. IT-Tests.com can help a lot of people achieve their dream. If you choose IT-Tests, but you do not successfully pass the examination, IT-Tests.com will give you a full refund.
Exam Code: JN0-522
Exam Name: Juniper (FXV,Associate (JNCIA-FWV))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 160 Questions and Answers
Last Update: 2013-10-13
JN0-522 (FXV,Associate (JNCIA-FWV)) Free Demo Download: http://www.it-tests.com/jn0-522.html
NO.1 Click the Exhibit button. Traffic from the Internet to the partner servers must use a VIP. In the exhibit,
what is true about the configuration of this feature?
A.You cannot use a VIP in this environment.
B.The VIP can be configured on the e0/4 interface.
C.The VIP can be configured in the Corporate or Internet zone using a different subnet than the physical
interface.
D.The VIP will work only if the destination ports in the incoming packet headers are mapped to the same
ports in the Corporate zone.
Answer:A
Juniper exam dumps JN0-522 JN0-522 dumps
NO.2 Which ScreenOS CLI policy statement keyword would enable a policy only during specified times, days,
and/or dates?
A.at
B.calendar
C.schedule
D.scheduler
Answer:C
Juniper JN0-522 JN0-522 JN0-522 exam prep JN0-522 JN0-522 practice test
NO.3 Click the Exhibit button. In the exhibit, which routing command would allow host A to communicate with
host C? (Note: Assume a route from the SSG 20 to host A's subnet already exists.)
A.set route 0.0.0.0/0 int e0/3 gateway 177.11.56.254
B.set route 1.1.70.0 interface e0/3 gateway 177.11.56.254
C.configure route 1.1.70.0/24 gateway 177.11.56.254 int e0/3
D.set route 1.1.70.0/24 interface e0/3 gateway 177.11.56.254
Answer:D
Juniper braindump JN0-522 JN0-522 exam JN0-522 JN0-522 dumps
NO.4 Click the Exhibit button. In the exhibit, what is the correct address book entry for host C?
A.set address C 1.1.70.250/32
B.set address Partner C 1.1.70.250
C.set address Partner 1.1.70.250/32
D.set address Partner C 1.1.70.250/32
Answer:D
Juniper test questions JN0-522 JN0-522 JN0-522 dumps
NO.5 Which ScreenOS CLI command would be useful for troubleshooting a policy deny?
A.get flow debug
B.debug flow basic
C.exec flow analysis
D.debug session basic
Answer:B
Juniper study guide JN0-522 certification JN0-522 study guide
NO.6 You enter the following command: set int e0/8 mip 1.1.8.32 host 10.1.10.32 netmask 255.255.255.255
How many MIP address translations have you just configured?
A.1
B.8
C.128
D.256
Answer:A
Juniper test questions JN0-522 pdf JN0-522 braindump JN0-522 certification JN0-522 braindump
NO.7 Which ScreenOS CLI command would be used to view traffic logs?
A.get traffic
B.get log policy
C.get policy log
D.get log traffic
Answer:D
Juniper original questions JN0-522 JN0-522 JN0-522
NO.8 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer:A
Juniper JN0-522 JN0-522 dumps JN0-522
NO.9 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer:D
Juniper JN0-522 JN0-522
NO.10 Which command can you use to view the log of IKE negotiations and results?
A.get event type 536
B.get ike cookie
C.get sa active
D.debug ike basic
Answer:A
Juniper test questions JN0-522 exam JN0-522 exam
NO.11 You want to minimize the number of IP addresses, subnets, and policies in use. How should you
configure your tunnel interface?
A.Configure the tunnel interface with an IP address with a 32 bit subnet mask.
B.Configure the tunnel interface with an IP address with a 30 bit subnet mask.
C.Configure the tunnel interface as unnumbered and place the interface in the same zone as the
designated interface.
D.Configure the tunnel interface as unnumbered, but place the tunnel interface in a different zone than the
designated interface.
Answer:C
Juniper JN0-522 certification training JN0-522 JN0-522 questions
NO.12 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer:A B
Juniper JN0-522 JN0-522
NO.13 Your VPN tunnel does not pass traffic. You run the get ike cookie command and discover that there is no
cookie. Which two should be verified? (Choose two.)
A.routes
B.Phase 1 configuration options
C.Phase 2 configuration options
D.selected quick mode encryption algorithms
Answer:A B
Juniper JN0-522 JN0-522 JN0-522 JN0-522
NO.14 Click the Exhibit button. In the exhibit, what is the correct command to configure a default route on the
SSG 20?
A.set route 0.0.0.0/0 vrouter untrust
B.set route 0.0.0.0/0 interface e0/4 gateway 143.45.56.254
C.set route 0.0.0.0/0 interface e0/4 next-hop 143.45.56.254
D.set route 0.0.0.0/0 interface 143.45.56.1 gate 143.45.56.254
Answer:B
Juniper original questions JN0-522 JN0-522 certification training JN0-522
NO.15 What needs to be configured in Phase 2 of a route-based VPN, that does not need to be configured in a
policy-based VPN?
A.proxy-id
B.tunnel-binding
C.transport mode
D.custom proposals
Answer:B
Juniper dumps JN0-522 JN0-522 exam prep JN0-522 test questions JN0-522 JN0-522 test answers
NO.16 Assuming factory default settings, which statement describes the minimum requirements for WebUI
management access to the SSG 5?
A.Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access
192.168.1.1.
B.Terminate the bootup sequence from the console device, open a browser on the console device and
access 192.168.1.1.
C.Connect a PC addressed on the 192.168.1.0 subnet, to the highest numbered interface and open a
browser and access 192.168.1.1.
D.Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a
browser to the interface address.
Answer:C
Juniper certification training JN0-522 questions JN0-522 exam simulations
NO.17 Which ScreenOS CLI command is required to enable a policy during specified times, days, or dates?
A.set time
B.set clock
C.set calendar
D.set scheduler
Answer:D
Juniper JN0-522 certification training JN0-522 practice test
NO.18 Click the Exhibit button. In the exhibit, which two forms of address translation would have generated
the output shown? (Choose two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer:B C
Juniper exam simulations JN0-522 exam simulations JN0-522 exam JN0-522 answers real questions
NO.19 Which statement is correct about tunnel interfaces?
A.They can have overlapping IP addresses.
B.They need to be configured in the zone where the protected resources reside.
C.They can be unnumbered and used in policy-based translations if the interface is in route mode.
D.They can be unnumbered from any interface residing on the same virtual router as the protected
resources.
Answer:D
Juniper JN0-522 JN0-522 exam JN0-522 demo JN0-522 demo
NO.20 Click the Exhibit button. In the exhibit, if host A initiates a Web browsing session with host D, and the
E0/1 interface of the SSG 20 is in NAT mode, what will be the source address of the packet arriving at
host D?
A.10.1.1.1
B.10.1.10.5
C.143.45.56.1
D.143.45.56.254
Answer:C
Juniper JN0-522 JN0-522 JN0-522 exam simulations
IT-Tests.com offer the latest 00M-624 Questions & Answers and high-quality HH0-240 PDF Practice Test. Our 70-467 VCE testing engine and PMI-100 study guide can help you pass the real exam. High-quality 70-487 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.it-tests.com/jn0-522.html
没有评论:
发表评论