2014年1月17日星期五

Juniper JN0-692認証試験に合格できない心配は要らない

JPexamを選択したら、成功が遠くではありません。JPexamが提供するJuniperのJN0-692認証試験問題集が君の試験に合格させます。テストの時に有効なツルが必要でございます。

最近の数年間で、IT領域の継続的な発展と成長に従って、JN0-692認証試験はもうJuniper試験のマイルストーンになりました。JuniperのJN0-692の認証試験はあなたがIT分野のプロフェッショナルになることにヘルプを差し上げます。JuniperのJN0-692の試験問題を提供するウェブが何百ありますが、なぜ受験生は殆どJPexamを選んだのですか。それはJPexamにはIT領域のエリートたちが組み立てられた団体があります。その団体はJuniperのJN0-692の認証試験の最新の資料に専攻して、あなたが気楽にJuniperのJN0-692の認証試験に合格するためにがんばっています。JPexamは初めにJuniperのJN0-692の認証試験を受けるあなたが一回で成功することを保証します。JPexamはいつまでもあなたのそばにいて、あなたと一緒に苦楽を共にするのです。

JPexamはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がJPexamの問題集を使うので試験に合格しますた。彼らはJPexamの問題集が有効なこと確認しました。JPexamが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。

試験番号:JN0-692問題集
試験科目:Service Provider Routing and Switching Support, Professional
最近更新時間:2014-01-17
問題と解答:全171問
100%の返金保証。1年間の無料アップデート。

全てのIT専門人員はJuniperのJN0-692の認定試験をよく知っていて、その難しい試験に受かることを望んでいます。JuniperのJN0-692の認定試験の認可を取ったら、あなたは望むキャリアを得ることができるようになります。JPexamのJuniperのJN0-692試験トレーニング資料を利用したら、望むことを取得できます。

JPexamが提供する真実と全面的なJuniper認証試験について資料で100%で君の試験に合格させてまたあなたに1年無料のサービスを更新し、今はJPexamのインターネットで無料のJuniperのJN0-692認証試験問題集のソフトウェアがダウンロード することができます。

JPexamはあなたが次のJuniperのJN0-692認定試験に合格するように最も信頼できるトレーニングツールを提供します。JPexamのJuniperのJN0-692勉強資料は問題と解答を含めています。それは実践の検査に合格したソフトですから、全ての関連するIT認証に満たすことができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/JN0-692_exam.html

NO.1 You are asked to retain several routes from an external BGP neighbor in the routing table on
your local router, but you are not allowed to forward traffic to these destinations. You have
configured a forwarding table firewall filter to block these routes, and applied it under the (edit
forwarding-options] hierarchy, but the routes are still showing up in the forwarding table. What is
required to achieve this task?
A. Configure an EBGP import policy on your local router to block the routes.
B. Have the EBGP neighbor configure an export policy to block the routes.
C. Configure an export policy for the forwarding table to block the routes.
D. Use the no-install configuration statement within the EBGP neighbor group on your local router.
Answer: C

Juniper   JN0-692   JN0-692   JN0-692

NO.2 One of your router's OSPF adjacencies is down.
What are three reasons for this adjacency state change? (Choose Three)
A. A filter has just been configured on one of the OSPF routers.
B. The OSPF hello value is the same on both routers.
C. The controlling BFD session state has gone down.
D. The authentication key on both routers matches.
E. One of the physical interfaces has gone down.
Answer: A,C,E

Juniper   JN0-692   JN0-692   JN0-692   JN0-692

NO.3 You have recently added LDP-signaled VPLS to your network. The VPLS connections are
established and you have been asked to verify that the forwarding plane is working properly. Which
three commands would you use? (Choose three.)
A. ping mpls Idp <fec>
B. show vpls connections
C. traceroute mpls Idp <fec>
D. show vpls mac-table
E. show Idp statistics
Answer: A,C,D

Juniper   JN0-692参考書   JN0-692問題集
10. R1 and R2 are IS-IS Level 1 routers, but are not forming an adjacency.
Which two reasons would account for this happening? (Choose two.)
A. The remote router is configured for both IPv4 and IPv6.
B. The remote router does not have family iso enabled on its interface,
C. The remote router does not have family clns enabled on its interface.
D. The remote router is not configured to participate in the same Level 1 area
Answer: B,D

Juniper   JN0-692   JN0-692

NO.4 Your currently configured regular expression does not match the AS path shown below:
2135.55 55 55 55 3796
Which three regular expressions would match this path? (Choose three.)
A. "."2135"
B. "2135.*"
C. "* 55(1, 3) *"
D. "2135 55(5) 3796"
E. "2135 55(1, 2) 3796"
Answer: B,C,E

Juniper参考書   JN0-692   JN0-692認定試験   JN0-692

NO.5 Your OSPF network includes an NSSA. Which LSA type is injected into the NSSA by the ASBR?
A. Type 3
B. Type 5
C. Type 7
D. Type 9
Answer: C

Juniper   JN0-692参考書   JN0-692   JN0-692参考書   JN0-692問題集   JN0-692認証試験

NO.6 You have applied a customized EXP rewrite rule on router R1 on the egress of the interface
connecting to router R2. You want to verify if it is working properly. Which two methods would you
use to accomplish this task? (Choose two.)
A. Apply a rewrite rule on the ingress of R2 for packets coming in from R1 and count those packets
for the new EXP values with a firewall filter as they leave R2.
B. Use the traceroute utility.
C. Use an output filter on R1 that matches and counts on various EXP values on packets going to R2.
D. Use an input firewall filter on R2 that matches and counts on various EXP values on packets
coming from R1.
Answer: C,D

Juniper   JN0-692認定資格   JN0-692問題集

NO.7 You have recently implemented a new Layer 2 VPN and it is not establishing. The show I2vpn
connections command displays an out-of-range state.
What is causing this problem?
A. The local site ID value is too high for the label block.
B. The VRF target community values do not match between sites.
C. The VRF route distinguisher values do not match between sites.
D. The local site ID is not defined.
Answer: A

Juniper   JN0-692   JN0-692練習問題   JN0-692   JN0-692   JN0-692

NO.8 You recently added your autonomous system to an existing BGP confederation. You notice that
a route that had a local preference of 100 now has a local preference of 50. Which statement
explains the change?
A. BGP path attributes such as next hop, local preference, and MED are normally restricted to a
single AS but are allowed to propagate throughout the confederation's AS members.
B. The confederation has sub-ASs that require all IBGP routes to have a local preference of 50 or
below.
C. When your Junos devices joined the confederation, they lost IBGP connectivity to the route in
question; the local preference reverted to 50 once the BGP peering established.
D. The route is being shared through an EBGP peer, and the confederation is propagating the local
preference from the peer.
Answer: A

Juniper認証試験   JN0-692参考書   JN0-692練習問題   JN0-692参考書

NO.9 An OSPF neighbor between routers R1 and R2 is stuck in loading state on R2. What are two
causes? (Choose two.)
A. OSPF is not enabled on the interfaces.
B. A firewall filter is blocking OSPF hellos on both sides.
C. The R1 router has received a corrupted link-state request packet.
D. The interface MTU is mismatched between the routers.
Answer: C,D

Juniper認定証   JN0-692練習問題   JN0-692問題集   JN0-692認証試験   JN0-692

JPexamは最新の70-684問題集と高品質のLOT-405問題と回答を提供します。JPexamのE20-553 VCEテストエンジンと70-415試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-N45 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/JN0-692_exam.html

没有评论:

发表评论