SASInstituteのA00-212認定試験は人気があるIT認証に属するもので、野心家としてのIT専門家の念願です。このような受験生はA00-212認定試験で高い点数を取得して、自分の構成ファイルは市場の需要と互換性があるように充分な準備をするのは必要です。
今の多くのIT者が参加している試験に、SASInstituteのA00-212認定試験がとても人気がある一つとして、合格するために豊富な知識と経験が必要です。SASInstituteのA00-212認定試験に準備する練習ツールや訓練機関に通学しなればまりませんでしょう。JPexamは君のもっともよい選択ですよ。多くIT者になりたい方にSASInstituteのA00-212認定試験に関する問題集を準備しております。君に短い時間に大量のITの専門知識を補充させています。
JPexamは多くの人に便利を与えるとともに、多くの人の夢が実現させるサイトでございます。もし君はまだIT試験で心配すれば、私達JPexamの問題集を選んでください。JPexamは長年の研究をわたって研ITの認証試験に関する品質が高く、範囲は広い教育資料が開発しました。それは確かに君の試験に役に立つとみられます。
SASInstituteのA00-212認定試験の合格証明書はあなたの仕事の上で更に一歩の昇進で生活条件が向上することが助けられます。SASInstituteのA00-212認定試験はIT専門知識のレベルの検査でJPexamの専門IT専門家があなたのために最高で最も正確なSASInstituteのA00-212試験資料が出来上がりました。JPexamは全面的な最高のSASInstitute A00-212試験の資料を含め、きっとあなたの最良の選択だと思います。
それぞれのIT認証試験を受ける受験生の身近な利益が保障できるために、JPexamは受験生のために特別に作成されたSASInstituteのA00-212試験トレーニング資料を提供します。この資料はJPexamのIT専門家たちに特別に研究されたものです。彼らの成果はあなたが試験に合格することを助けるだけでなく、あなたにもっと美しい明日を与えることもできます。
試験番号：A00-212問題集
試験科目：SAS Advanced Programming Exam for SAS 9
最近更新時間：2014-03-01
問題と解答：全132問
100％の返金保証。1年間の無料アップデート。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/A00-212_exam.html
NO.1 The following SAS program is submitted:
date view=sauser.ranch;
describe;
run;
What is the result?
A. The program creates a DATA step view called SASUSER.RANCH and places the
program cod in the current editor window
B. The program retrieves the SAS source code that creates the view and places it in the
output window
C. The program creates a DATA step view called SASUSER.RANCH and places it in the
SAS log
D. the program retrieves the SAS source code that creates the view and places it in the
SAS log
Answer: D
SASInstitute A00-212 A00-212 A00-212
NO.2 The following SAS program is submitted:
%let dept=prod;
%let prod=merchandise;
The following message is written to the SAS log:
The value is "merchandise"
Which SAS System option writes this message to the SAS log? A. %put the value is "&&&dept";
B. %put the value is "&&&dept";
C. %put the value is "&&&dept";
D. %put the value is %quote(&&&dept);
Answer: A
SASInstitute練習問題 A00-212認定試験 A00-212認定証 A00-212
NO.3 When reading a SAS data file, what does the NOBS=option on the SET statement
represent?
A. A variable that represents the total number of observation in the output data set(s)
B. A variable that represents a flag indicating the end of the file
C. A variable that represents the total number of observations in the input data set(s)
D. A variable that represents the current observation number
Answer: C
SASInstitute A00-212 A00-212参考書 A00-212 A00-212
NO.4 The following SAS program is submitted:
%let a=cat;
%macro animal(a=frog);
%let a=bird;
%mend;
%animal(a=pig)
%put a is &a;
What is written to the SAS log?
A. a is pig
B. a set cat
C. a is frog
D. a is bird
Answer: B
SASInstitute A00-212認証試験 A00-212 A00-212認定証
NO.5 The following SAS program is submitted:
Data sasuser.history;
Set sasuser.history(keep=state x y
Rename = (state=ST));
Total=sum(x,y);
Run;
The SAS data set SASUSER.HISTORY has an index on the variable STATE.
Which describes the result of submitting the SAS program?
A. The index on STATE is deleted and an index on ST is created
B. The index on STATE is recreated as an index on ST
C. The index on STATE is deleted
D. The index on STATE is updated as an index on ST
Answer: C
SASInstitute過去問 A00-212参考書 A00-212練習問題
NO.6 The following SAS program is submitted:
%macro one(input);
%two;
%put the value is &date;
%mend;
%macro two;
data _null_;
call symput('date','12SEP2008');
run;
%mend;
%let date=31DEC2006;
%one(&date)
What is the result when the %PUT statement executes.?
A. A macro variable DATE with the value 12SEP2008 is retrieved from the local symbol
table for the ONE macro
B. A macro variable DATE with the value 12SEP2008 is retrieved from the local symbol
table for the TWO macro
C. A macro variable DATE with the value 12SEP2008 is retrieved from the global
symbol table
D. A macro variable DATE with the value 31DEC2006 is retrieved from the global
symbol table
Answer: C
SASInstitute A00-212認定試験 A00-212認証試験 A00-212
NO.7 The following SAS program is submitted:
%let first=yourname;
%let last=first;
%put &&&last;
What is written to the SAS Log?
A. First
B. Yourname
C. &&First
D. &yourname
Answer: B
SASInstitute A00-212過去問 A00-212 A00-212認証試験
NO.8 The following SAS program is submitted:
%macro check(num=4);
%let result=%eval(&nm gt 5);
%put result is &result;
%mend;
%check (num=10)
What is written to the SAS log?
A. result is true
B. result is 10 gt 5
C. result is 1
D. result is 0
Answer: C
SASInstitute A00-212 A00-212 A00-212 A00-212 A00-212認証試験
NO.9 CORRECT TEXT
The following SAS program is submitted:
%macro check(num=4);
%let result=%sysevalf(&num+0.5);
%put result is &result;
%mend;
%check(num=10)
What is the written to the SAS log?
result is
result is 10
result is 10.5
result is 10+0.5
Answer: C
SASInstitute A00-212 A00-212問題集 A00-212認定証
NO.10 The SAS data set WORK.TEMPDATA contains the variables FMTNAME, START and
LABEL and it consists of 10 observations.
The following SAS program is submitted:
Proc format cntlin=wor.tempdata;
Run;
What is the result of submitting the FORMAT procedure step?
A. It uses the WORK.TEMPDATA SAS data set as input to create the format
B. All formats created will be stored in two WORK.TEMPDATA SAS data set
C. An ERROR message is written to the SAS log because the program is incomplete
D. NO formats are created in this step
Answer: A
SASInstitute参考書 A00-212認定証 A00-212過去問
NO.11 Which SET statements option names a variable that contains the number of the
observation to read during the current iteration of the DATA step? A. OBS=pointobs
B. POINT=pointobs
C. KEY=pointobs
D. NOBS=pointobs
Answer: B
SASInstitute認定資格 A00-212過去問 A00-212 A00-212 A00-212認定資格
NO.12 The following SAS program is submitted:
%macro check(num=4);
%let result=%sysevalf(&num+0.5);
%put result is &result;
%mend;
%check(num=10)
What is the written to the SAS log?
A. result is
B. result is 10.5
C. result is 10+0.5
D. result is 10
Answer: B
SASInstitute A00-212認証試験 A00-212参考書 A00-212
NO.13 Which SQL procedure program deletes rows from the data set CLASS? A. proc sql;
Select * from class
Where age<(select stop_age from threshold);
Quit;
B. proc sql;
Modify table class
Delete where age<(select stop_age from threshold);
Quit
C. proc sql;
Delete from class
Where age<(select stop_age from threshold);
Quit;
D. proc sql;
Alter from class
Delete where age<(select stop_age from threshold);
Quit;
Answer: C
SASInstitute参考書 A00-212過去問 A00-212 A00-212
NO.14 Given the SAS data sets ONE and TWO:
The following SAS program is submitted:
Proc sql;
Select two.*,budget from one <insert JOIN operator here> two on one.year=two.year,
Quit;
The following output is desired:
Which JOIN operator completes the program and generates the desired output? A. FULL JOIN
B. INNER JOIN
C. LEFT JOIN
D. RIGHT JOIN
Answer: A
SASInstitute認証試験 A00-212問題集 A00-212認定試験 A00-212認定証
NO.15 Given the SAS data set SAUSER.HIGWAY:
SASUSER.HIGHWAY
The following SAS program is submitted:
%macro highway;
proc sql nonprint;
%let numgrp=6;
select distinct status into:group1-:group&numgrp from sasuser.highway;
quit;
%do i=1 %to &numgrp;
proc print data =sasuser.highway;
where status ="&&group&I";
run;
%end;
%mend;
%highway
How many reports are produced?
A. 2
B. 6
C. 0
D. 5
Answer: A
SASInstitute練習問題 A00-212 A00-212練習問題
NO.16 The following SAS program is submitted:
data temp;
length 1 b 3 x;
infile 'file reference';
input a b x;
run;
What is the result?
A. The data set TEMP is not created because variables A and B have invalid lengths
B. The data set TEMP is created, but variable X is not created
C. The data set TEMP is not created because variable A has an invalid length
D. The data set TEMP is created and variable X has a length of 8
Answer: C
SASInstitute参考書 A00-212問題集 A00-212 A00-212 A00-212
NO.17 Which SAS procedure changes the name of a permanent format for a variable stored in a SAS data
set?
A. DATASETS
B. MODIFY
C. FORMAT
D. REGISTRY
Answer: A
SASInstitute A00-212 A00-212問題集 A00-212
NO.18 Given the SAS data set ONE:
ONE
DIVISION SALES
A 1234
A 3654
B 5678
The following SAS program is submitted:
Data_null_;
Set one;
By divition;
If first.division then
Do;
%let mfirst=sales;
end;
run;
What is the value of the macro variable MFRIST when the program finishes execution?
A. 1234
B. sales
C. 5678
D. null
Answer: B
SASInstitute A00-212 A00-212認定試験 A00-212
NO.19 Which SET statement option names a variable that contains the number of the
observation to read during the current iteration of the DATA step? A. NOBS=pointobs
B. OBS=pointobs
C. KEY=pointobs
D. POINT=pointobs
Answer: D
SASInstitute認定試験 A00-212 A00-212参考書 A00-212 A00-212認定資格
NO.20 The following SAS program is submitted:
%micro test(var);
%let jobs=BLACKSMITH WORDSMITH SWORDSMITH;
%let type=%index(&jobs,&var);
%put type = &type;
%mend;
%test(SMITH)
What is the value of the macro variable TYPE when the %PUT statement executes?
A. 0
B. Null
C. 6
D. 3
Answer: C
SASInstitute A00-212練習問題 A00-212過去問 A00-212 A00-212認定試験 A00-212参考書
JPexamは最新の642-242問題集と高品質の000-619問題と回答を提供します。JPexamのVCP510PSE VCEテストエンジンとHP0-J62試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のMB6-872 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论