中国でこのような諺があります。天がその人に大任を降さんとする時、必ず先ず困窮の中におきてその心志を苦しめ、その筋骨を労し、その体膚を餓やし、その身を貧困へと貶めるのである。この話は現在でも真です。しかし、成功には方法がありますよ。正確な選択をしたら、そんなに苦労しなくても成功することもできます。JPexamのIBMの000-314試験トレーニング資料はIT職員を対象とした特別に作成されたものですから、IT職員としてのあなたが首尾よく試験に合格することを助けます。もしあなたは試験に準備するために知識を詰め込み勉強していれば、間違い方法を選びましたよ。こうやってすれば、時間とエネルギーを無駄にするだけでなく、失敗になるかもしれません。でも、今方法を変えるチャンスがあります。早くJPexamのIBMの000-314試験トレーニング資料を買いに行きましょう。その資料を手に入れたら、異なる人生を取ることができます。運命は自分の手にあることを忘れないでください。
JPexamの000-314問題集を利用してみたらどうですか。この問題集は000-314試験に関連するすべての参考書の中で一番優秀なものだと言えます。なぜならば、次の四つの理由があります。第一に、JPexamの000-314問題集はIT領域の専門家達が長年の経験を活かして作成されたもので、試験の出題範囲を正確に絞ることができます。第二に、JPexamの000-314問題集は実際試験に出題される可能性がある問題を全部含んいます。第三に、JPexamの000-314問題集は試験の一発合格を保証し、もし受験生が試験に失敗すれば全額返金のことができます。第四に、JPexamの000-314問題集はPDF版とソフト版という二つのバージョンに分けています。この二つのバージョンを利用して、受験生の皆さんは試験の準備をするときにもっと楽になることができます。
試験番号：000-314問題集
試験科目：IBM WebSphere Message Broker V6.1. System Administration
最近更新時間：2014-01-17
問題と解答：全106問
100％の返金保証。1年間の無料アップデート。
あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。JPexam IBMの000-314試験問題集はあなたが自分の目標を達成することを助けられます。JPexam IBMの000-314問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の１００パーセント真実な解答を提供することを保証します。
JPexamが提供したIBMの000-314トレーニング資料を利用してから試験に合格することがとてもたやすことになって、これは今までがないことです。これは試験に合格した受験生の一人が言ったのです。JPexamが提供したIBMの000-314トレーニング資料はあなたの雑然とした考えを整理できます。そうしたらあなたは心理的なストレスを減らせるだけでなく、気楽に試験に受かることもできます。JPexamには一部の問題と解答を無料に提供して差し上げますから、もし私の話を信じないのなら、試用版を使ってみてください。利用してみたら効果があるかどうか自分でよく知っているようになります。あなたに絶対向いていると信じていますよ。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/000-314_exam.html
NO.1 An application has a requirement that tables in the broker database be accessible with an ID that is not
the service ID of the broker using ODBC Data Source Names (DSN). What are the two tasks the
administrator needs to do?
A.Create an ODBC DSN to the broker database with mqsicreatedb.
B.Setup an ODBC DSN to the broker database with mqsi_setupdatabase.
C.Define an ODBC DSN to the broker database with another alias name.
D.Associate the application ID and password with the alias name with the mqsisetdbparms command.
E.Associate the application ID and password with the alias name with the mqsisetsecurity command.
Answer:C D
IBM 000-314認定証 000-314練習問題
NO.2 In a new implementation of the WebSphere Message Broker (WMB), an insurance company has
decided that the Message Broker Explorer (SupportPac IS02) will be implemented. They have never used
JMS with WebSphere MQ. Which feature in the Message Broker Explorer requires MQ JMS configuration?
A.Adopt a new broker
B.Full service tracing
C.WebSphere DataPower Security Wizard
D.Connect to a remote configuration manager
Answer:C
IBM 000-314認定試験 000-314 000-314
NO.3 Under a load test in the Pre-PROD environment, the performance test has shown that the broker
cannot sustain the required peak number of HTTP connection requests. What is an appropriate action?
A.Create another Execution Group and deploy another copy of the flow.
B.Change the httplistener component parameter '-n maxThreads' to a higher value.
C.Increase the number of 'Additional Instances' of the flow and redeploy the flow.
D.Increase the number of 'Additional Instances' of the HTTPInput node and redeploy the flow.
Answer:B
IBM 000-314 000-314
NO.4 A broker administrator needs to connect via the Configuration Manager Proxy API Exerciser to a
configuration manager running on Solaris which was configured using default settings and managing a
BRKR1 broker running on a Windows XP environment. What four selections need to be furnished to
successfully connect to the configuration manager?
A.Port number 1414
B.Configuration Manager name
C.BRKR1 queue manager name
D.Configuration Manager hostname
E.SYSTEM.BKR.CONFIG channel name
F.Configuration Manager queue manager name
G.SYSTEM.DEFAULT.BKR.CONFIG channel name
Answer:A D E F
IBM問題集 000-314 000-314 000-314練習問題 000-314
NO.5 A broker administrator must set up policy set bindings for a new message flow. The flow includes the
following SOAP nodes: SOAPInput, SOAPAsyncRequest, SOAPAsyncResponse and SOAPReply. Which
two SOAP nodes result in the need for a consumer policy set binding definition?
A.SOAPInput
B.SOAPReply
C.SOAPAsyncRequest
D.SOAPAsyncResponse
Answer:C D
IBM練習問題 000-314 000-314
NO.6 An administrator needs to control domain objects that are deployable. To which three objects is it
possible to grant the Deploy Access Control List (ACL) permission?
A.Broker
B.Topology
C.Root Topic
D.Subscription
E.Execution Group
F.Configuration Manager
Answer:A C E
IBM認定資格 000-314認定試験 000-314認定資格 000-314 000-314練習問題 000-314
NO.7 The administration team has decided to retain control over the infrastructure but wants to allow the
developers to deploy flows at will in the development environment. The developers need to change trace
and debug properties of execution groups (EGs), but not brokers. Which Access Control List (ACL)
permissions do the developers require?
A.Full to the EGs
B.View to the Root and Edit to the EGs
C.View to the Brokers and Deploy to the EGs
D.Deploy to the Brokers and Edit to the EGs
Answer:A
IBM 000-314練習問題 000-314認定試験 000-314
NO.8 A broker domain has two brokers, BRK1 and BRK2, configured to a configuration manager CFGMGR.
A new set of applications wants to take advantage of the publish/subscribe topic-based security. Which
steps does the administrator need to perform?
A.Create a UserNameServer and run the mqsichangeproperties command on the brokers and the
configuration manager to include the UserNameServer name.
B.Run the command mqsichangeproperties command on the brokers and mqsichangeconfigmgr on the
configuration manager to activate Access Control List's on the topics.
C.Run the command mqsijoinmqpubsub against each application name and change all the brokers with
the mqsichangebroker command to enable the security option on topics.
D.Create a UserNameServer and run the mqsichangebroker command on the brokers and
mqsichangeconfigmgr on the configuration manager to include the UserNameServer queue manager
name.
Answer:D
IBM練習問題 000-314認定資格 000-314認定証 000-314
NO.9 An administrator has set up topic-based security as shown in the Exhibit. Which user(s) will have
access to perform publish action on the topic TopicA/TopicY/TopicM?
A.Only user1
B.Only user2
C.Only user3
D.Both user1 and user3
Answer:A
IBM 000-314参考書 000-314認定資格 000-314
NO.10 A company's IT division has a broker domain consisting of a single broker BRK configured to
configuration manager CFGMGR. Both the components are running on a single AIX server. A new
security policy was put in place by the company which required all components to be started and stopped
under a new user ID. Which setup does the administrator need to perform to enable the broker and
configuration manager to be started or stopped with the new user ID?
A.Create a UserNameServer and add the new user ID.
B.Add the new user ID to mqm and mqbrkrs groups of the machine.
C.Run the mqsichangebroker command with the new user ID and password.
D.Run the mqsichangedbimgr command with the new user ID and password.
E.Run the mqsisetdbparms command adding the new user ID and password.
Answer:B
IBM認証試験 000-314認定試験 000-314
NO.11 An administrator wants to quickly configure a broker to make use of HTTP over SSL on a development
environment with minimum configuration. Which property must be set by running the command
mqsichangeproperties?
A.port
B.keystorePass
C.keystoreFile
D.enableSSLConnector
Answer:D
IBM参考書 000-314認定資格 000-314
NO.12 A developer is writing an application that needs to coordinate the processing of MQ messages and
database updates in a message flow for distributed systems. What does the broker administrator need to
configure as the XA Resource Manager?
A.The broker
B.The database
C.The queue manager
D.The operating system
E.The configuration manager
Answer:C
IBM 000-314問題集 000-314過去問 000-314 000-314参考書 000-314参考書
NO.13 A large bank has six brokers that are geographically dispersed. Three of the brokers are used in a
publish/subscribe collective while three are not. For backup purposes, the decision has been made to use
three cloned brokers. Which choice is the most appropriate?
A.Use only one broker in the collective as a clone.
B.Use all three of the brokers in the collective as the clones.
C.Make two brokers from the collective clones, in case one fails.
D.Use no brokers in the collective as clones, it is not permitted.
Answer:A
IBM 000-314 000-314 000-314 000-314認定資格
NO.14 Files in the specified input directory are not being processed by a flow that uses a FileInput node. The
error messages indicate that the file nodes cannot continue executing (BIP3331). What is the cause of the
error messages?
A.The file is locked during this directory scan.
B.The input file exceeds the maximum file size.
C.The broker does not have the required access to these files and directories.
D.There is more than one instance of this message flow deployed to this computer.
Answer:C
IBM 000-314 000-314
NO.15 A developer has built a flow that uses the EmailOutput node to send notifications of order shipments.
The SMTP server requires authentication with a specific user ID and password. What does the
administrator need to do before the developer attempts to deploy the flow?
A.Create a security identity with mqsisetdbparms.
B.Update the default SMTP configurable service with mqsiupdatebroker.
C.Create a SMTP configurable service with mqsicreateconfigurableservice.
D.Include the message set that contains the SMTP configuration information.
Answer:A
IBM練習問題 000-314練習問題 000-314問題集 000-314
NO.16 A large utility company has decided to implement messaging using WebSphere MQ with WebSphere
Message Broker (WMB) V6.1. The production broker will be hosted on the z/OS system where Resource
Recovery Service (RRS) has been configured and is active. What must the administrator do to ensure all
transactional message flows will be globally coordinated on this production broker?
A.Nothing.
B.Ensure the message flow is configured as a coordinated transaction in the bar file.
C.In the bar file, ensure the Transaction mode setting for the MQInput node is properly set to "Yes" and all
other Transaction modes are set to "Automatic".
D.Configure DB2 for XA coordination; configure the queue manager for XA coordination; and ensure the
message flow is configured as a coordinated transaction in the bar file.
Answer:A
IBM 000-314問題集 000-314
NO.17 A large enterprise is building several application message flows that include HTTPInput nodes. There is
a requirement to take advantage of WS-Security for the decryption of incoming messages to these flows
as well as encryption of data from the flows. The administrator needs to handle the necessary
configuration. What is the most efficient way to do this with the least impact on changing code or broker
configuration?
A.Use the IBM WebSphere MQ Internet Gateway.
B.Implement a WebSphere DataPower appliance.
C.Set up IBM WebSphere Transformation Extender for Integration Servers.
D.Create a new broker on a separate system using it to front-end all the security.
Answer:B
IBM 000-314問題集 000-314認定証
NO.18 As part of the migration from WebSphere Message Broker (WMB) V6.0 to V6.1, a developer has
provided the administrator a list of Java user-defined nodes that need to be migrated. The migration will
be from WMB V6.0 on one machine to WMB V6.1 on a different machine. Which three steps need to be
performed?
A.Clean the project in the Package Explorer.
B.Import the user-defined node project into the V6.1 Toolkit.
C.Use Rational Product Updater (RPU) to perform the migrations.
D.Run mqsimigratecomponents specifying the user Jar files directory.
E.Store the .pdb file in the directory specified by the -l parameter on the mqsichangebroker command.
F.Store the .jar file in the directory specified by the -l parameter on the mqsichangebroker command.
Answer:A B F
IBM認定試験 000-314 000-314 000-314
NO.19 A production broker in a large bank is being configured to allow WebSphere Application Server to be the
JMS provider. Defaults were used for directory paths during installation of the product. When creating a
JMSProvider configurable service for the WebSphere_WAS_Client, the administrator issues the following
command: mqsichangeproperties WBRK6_DEFAULT_BROKER -c JMSProviders -o
WebSphere_WAS_Client By default, where must the provider's Jar files be located on an AIX production
broker system?
A./var/mqsi/shared-classes
B./opt/IBM/mqsi/6.1/classes
C./var/mqsi/common/profiles
D./opt/IBM/mqsi/6.1/JMSProviders
Answer:A
IBM 000-314練習問題 000-314
NO.20 A company has its broker BRK running on machine brk.comp.com under the queue manager BRKQM
listening at port 1414. It is registered to configuration manager CFGMGR running on machine
cfg.comp.com under the queue manager CFGQM listening at port 1420. An administrator is entrusted
with the task of creating an execution group EXE1 under the broker BRK. Which command should be run
to achieve this task?
A.mqsicreateexecutiongroup -i brk.comp.com -q CFGQM -b BRK -e EXE1
B.mqsicreateexecutiongroup -i cfg.comp.com -n CFGMGR -b BRK -e EXE1
C.mqsicreateexecutiongroup -i cfg.comp.com -p 1420 -q CFGQM -b BRK -e EXE1
D.mqsicreateexecutiongroup -i brk.comp.com -p 1414 -q BRKQM -b BRK -e EXE1
Answer:C
IBM練習問題 000-314 000-314認定試験 000-314 000-314認定資格
JPexamは最新の74-343問題集と高品質のMB5-700問題と回答を提供します。JPexamの70-331 VCEテストエンジンとJN0-633試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のCAT-221 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论